Industrial Inverter

Industrial Inverter systems are used for rugged environments and designed particularly to safeguard critical loads in industrial applications. An galvanically isolationed transformer is used to isolate load from input supply. Otherwise, voltage transients, created by degraded mains supply, can seriously damage both inverter and the critical load.

The inverter converts DC voltage into pure sinusoidal AC voltage with constant amplitude and stable frequency. The unit works with an IGBT inverter bridge with PWM (pulse width modulation) having high efficiency in the partial load range as well as achieving a low distortion factor at non-linear load. Inverter output encompasses 6 IGBT modules, boosting the instant power capacity of the inverter by double fold with comparison to regular systems. This feature allows the inverter to handle higher capacity loads (inrush currents) with smaller capacity devices. In addition, switching at high frequency – 16KHz – keeps the output sin wave (THD) undistorted providing reliable solutions for nonlinear loads. On LCD panel all measurement values, real time base events and failures can be viewed and communicate remotely with RS485 port.

In the event of mains interruption or failure, the battery connected to the DC input feeds the load automatically and without interruption. If the battery discharge limit is exceeded, the inverter automatically turns off and a warning is given shortly before the discharged voltage limit is reached. Automatic change-over of the load to the bypass mains or a suitable spare supply occurs if the supply from the inverter falls outside the preset tolerances.

Having mono-phase and three-phase alternatives ASTOR Inverter systems are ideal for off-grid solar applications, wind turbine systems and for specific requirements of mission-critical processes where there is a need for reliable AC/DC conversion